[. . . ] Please read before operating your new Air Purifier The air purifier draws in room air from its air intake, lets the air pass through a Active Carbon Filter (deodorization filter) and a HEPA Filter (dust collection filter) inside of the unit, then discharges the air from its air outlet. The air purifier unit repeats this process by moving its internal fan. The Active Carbon Filter gradually absorbs odour elements as they repeatedly pass through the filter. ) Some odour ingredients absorbed by the filters may become separated and may be discharged through the air outlet and result in additional odour. [. . . ] mODE Selection Button · The operation mode can be switched, and the Indicator Light will turn on. The unit will operate at HIGH* fan speed for 10 minutes, then will alternate between MEDIUM and HIGH* for 20 minutes. 10 minutes: HIGH fan speed 20 minutes: MEDIUM fan speed 20 minutes: HIGH fan speed * HIGH fan speed is an intermediate speed between MEDIUM and MAX. ) The concentrated Plasmacluster Ions (ION SHOWER) will be generated in the room like a shower for 15 minutes, repeating the airflow cycles between strong and gentle. (The Plasmacluster Indicator Light repeats its colour cycles between blue and green. When the operation finishes, the unit will return to the prior operation. ⷠWhen pushing the ION SHOWER button while the ION SHOWER operation mode is working, the unit will return to the prior operation. When you press the POWER ON/OFF Button, a short beep will sound and operation will start in AUTO Mode. ⷠUnless unplug the power cord, the operation starts in the previous mode the unit was operated in. 1 hour Cancel 4 hours The unit will stop operation when the timer is up. The unit detects the dust, mold or airborne microbes using its sensors, and controls the generating amount of positive and negative ions automatically. When room air is impure, approximately same numbers of positive and negative ions will be released. When room air is clean, negative ions will be released in an increased rate and controls the ion balance. (The indicator light will be activated in about 1 month, when using the unit with mist operation 24 hours day, every day. When the Plasmacluster ion operation is in Clean Mode, or in AUTO Mode and the air in the room is impure, the Plasmacluster Ions will be released continuously. When the Plasmacluster ion operation is in the AUTO Mode and the air in the room is clean, this light will be activated and the unit will release the negative ions in the increased rate and controls the ion balance. When the Plasmacluster ion operation is in the ION SHOWER Mode, Plasmacluster indicator Light will repeart its colour cycles between blue and green. ⷠThe light can be turned off by using the `Lights ON/OFF Button' on the Remote Control. The condition of the CLEAN-SIGN depends on the room air condition detected by the Dust and Odour Sensors when the plug is inserted into the wall outlet. ⷠIt is possible to have a green CLEAN-SIGN with impurities in the air at the time that the air purifier was just introduced to the room environment. After a while, however, the base impurity rate will be adjusted to detect room air condition correctly. ⷠUse the Lights ON/OFF Button on the remote control to turn off the Indicator lights. [. . . ] 9W 10 W 70 W 36 m3/ hour 378m3/ hour 156m3/ hour 31 dBA 14 dBA 52 dBA 130 ml/ hour 40 ml/ hour 250 ml/ hour ~48m2*2 Dust/Odour/Temperature & Humidity Pre-filter & HEPA with Microbial control Washable Active Carbon 2. The applicable floor surface area is appropriate for operating the unit at maximum fan speed. ⷠApplicable floor surface area indicates the space where a certain amount of dust particles can be removed in 30 minutes. Standby Power In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes about 0. [. . . ]